|
No-Clean Liquid Fluxes
|
Class
|
|
NC-95
Data
Sheet (PDF)
MSDS (PDF)
|
NC-95 is a
no-clean low solid, rosin-free, halide-free organic soldering
flux formulated for wave soldering of high-end multi-layer
boards. It does not contain rosin and leaves practically no
residue after wave soldering. It does not leave insulative
residues on test pads and therefore does not cause any
interference to ICT. NC-95 no-clean flux conforms to
IPC-SF-818 specification.
|
2.20%
|
|
NC-98
Data Sheet
(DOC)
MSDS (PDF)
|
NC-98 is a
no-clean flux designed with a low solids content (3.0%s), and
is a halide free soldering flux formulated for wave soldering
of high-end multi-layer boards. The NC-98 creates less visible
residue, fewer fumes and higher SIR values. It does not leave
insulative residues on test pads and therefore does not cause
any interference to ICT. NC-98 no-clean flux conforms far
beyond the requirements of bellcore TR-TSY-000078 and
IPC-SF-818 Class 3 specifications. Per IPC-SF-818
specification, the NC-98 is characterized as ORLO flux and can
be used for no-clean applications.
|
3.00%
|
|
|
|
|
|
Water Soluble Liquid Fluxes
|
Class
|
|
WS-733
Data
Sheet (PDF)
MSDS (PDF)
|
AMTECH Water
Soluble WS-733 Flux is designed for wave soldering critical
21-25 Spray or Foam electronic assemblies. The unique
chemistry provides high reliability and excellent ionic
cleanliness. WS-733 does not create excessive foaming in
standard water cleaning systems and exhibits excellent
soldering properties in large volume production without
sacrificing reliability.
|
21-25%
|
|
WS-748
Data Sheet
(DOC)
MSDS (PDF)
|
AMTECH Water
Soluble WS-748 Flux is designed for wave soldering critical
electronic assemblies. The unique chemistry provides high
reliability and excellent ionic cleanliness. During wave
soldering, WS-748 has no offensive odor and gives off little
fumes compared to other water-soluble formulations. WS-748
does not create excessive foaming in standard water cleaning
systems and exhibits excellent soldering properties in large
volume production without sacrificing reliability.
|
17%
|
|
|
|
|
|
Specialty Fluxes
|
Class
|
|
NVOC-85
Data
Sheet (PDF)
MSDS (PDF)
|
AMTECH No-Clean
NVOC-85 is formulated using water as the base. This material
is a rosin and resin-free soldering flux formulated for wave
soldering. It leaves very low residue after wave soldering.
The No-Clean NVOC-85 flux conforms to IPC-SF-818 and European
DIN 8527 specifications. Per IPC-SF-818 specification,
No-Clean NVOC-85 is characterized as a LO flux and can be used
for No-Clean applications. Washing is not necessary since any
residual flux residues are non-corrosive and halide-free.
(2.5% solids. Application: Spray)
|
2.50%
|
|
HAL
Data
Sheet (DOC)
MSDS (PDF)
|
AMTECH's HAL-776
flux is used in hot solder leveling machines. HAL-776 flux
material exhibits high temperature stability and thermal
conductivity with complete solubility of residue. The flux is
designed for direct use from the container and needs no
dilution by any other solvents. AMTECH HAL-776 flux can be
used on both vertical and horizontal machines. (7.5% solids.
Application: Ver/Hor)
|
75%
|
|
|
|
|
|
All AMTECH liquid fluxes are available in
Flux-Rights™, a unique tool for rework and touch-up soldering.
Flux-Righters™ allow a controlled amount of flux to be
applied, thus eliminating the mess from conventional flux
bottles. Flux-Righters™ are ideal for surface mount rework or
manual assembly. Packaged and sold in boxes of 12.
Data
Sheet (PDF)
MSDS (PDF)
|
|
656108727
